Two additional RS422/RS485 ports with galvanic isolation
The PC Card 13611 adds two independent RS422/RS485 ports with galvanic isolation to your PC. Any two non-isolated serial interfaces can be implemented using the additional TTL ports.
Product properties:
Interfaces:
2x RS422/485 interface
2x serial TTL interface without galvanic isolation
usable with W&T interface modules as RS232, RS422, RS485 or 20mA interfaces
1x 32-bit PCI bus
for 5V PCI systems
Cards for 3.3V PCI systems on request
Galvanic isolation between PC, Port 1 and Port 2
Isolation voltage 1kV
Management and connectivity:
4 x UART 16950 with 128-byte FIFO
Plug-and-play: automatic configuration of base address and interrupt
Conforms to standards both in office and industrial environments:
High noise resistance per EN 61000-6-2
Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3
5 year guarantee
Technical data:
Connections and displays:
System bus:
32-bit PCI bus / 33MHz / Universal Voltage
Serial port:
2x RS422/485 interface
9-pin SUB-D adapter
2x non-isolated serial TTL ports
12-pin header with 2mm spacing
Operating modes:
RS422
RS485 2/4 wire with handshake control
RS485 2/4 wire with automatic control
Maximum baud rate
230.400 kbaud
Data format
any format
Signals:
RxD, TxD, CTS, DTR
Handshake:
No, RTS/CTS, Xon/Xoff
UART:
16950 with 128-byte FIFO
Galvanic isolation:
Isolation voltage min. 1kV DC
between PC and the serial ports (1 and 2)
Supply voltage:
5V DC, 12V DC
Current consumption:
typ. 200mA @ 5V
typ. 100mA @ 12V
Housing and other data:
Dimensions:
134 x 120mm (W x H)
Enclosure rating:
IP00
Weight:
approx. 105g
Ambient temperature:
Storage: -40..+70°C
Operating: 0..+70°C
Permissible relative humidity:
5..95% RH, non-condensing
Scope of delivery:
PCI card 2x RS422/RS485
Quick start manual
product CD with manual, German/English
In addition to the nominal interfaces, all serial W&T PCI cards provide additional serial TTL ports which can use interface modules to be converted into a standard port of any type.
These optional ports do not however have galvanic isolation between each other or to the PC.
The additional interface modules are connected to the interface card using flat cable and attached to a slot bracket in the PC housing. Both components can be ordered from W&T as a separate accessory.
+45 75 64 33 99
info@actcom.dk
