PCI card 2x 20mA, 1kV isolated
PCI card 2x RS422/RS485, 1kV isolated
1.785,00 kr. (ex. VAT)
Serial PCI baseboard, 1kV isol
1.410,00 kr. (ex. VAT)
PCI card 2x 20mA, 1kV isolated
WT13411
20mA interface card with two serial ports, 1kV isolation
1.785,00 kr. (ex. VAT)
10 in stock
Categories: Serial Standard PCI Cards, Serial PC cards
Ask a question about this product
Description
Application: PC as PLC programming device
Background information: As an option all serial W&T PCI interface cards in standard format offer the possibility of providing two additional ports in addition to the two already present on the card. These two interfaces are configured on the card as serial TTL ports which can be converted into any desired type of port by using the interface modules.
Note however that the optional ports do not provide galvanic isolation with respect to each other or to the PC, so that these ports can only connected to a peripheral which is not likely to be characterized by ground potential differences. Compatible peripheral devices would include those located in the immediate vicinity of the PC and which are powered from the same sub-distributor, as well as peripheral devices which are inherently potential-free. This is generally the case for any device which is powered from the interface or by a plug-in power supply. Otherwise you will need to provide external galvanic isolation. The additional interface modules are connected to the interface card by means of 2mm flat ribbon cable and attached using a slot in the PC case. Both components can be ordered as a separate accessory under article number 13013.Product properties:
- Equipping PCs with two galvanically isolated RS422/RS485 ports
- Compatible with PCI2.2 standard, for 5V PCI slots
- 1kV electrical isolation to the PC and between the ports
- Also with two serial TTL, non-galvanically isolated ports onboard: usable with W&T interface modules as RS232, RS422, RS485 or 20mA interfaces
- 4 x UART 16950 with 128-byte FIFO
- Plug-and-play: automatic configuration of base address and interrupt
- Includes drivers for Windows 95/98, NT4.0, 2000, XP, 2003, Vista and Server 2008
- Conforms to standards both in office and industrial environments:
- Increased noise immunity for industrial areas
- Stricter noise emission for residential and commercial areas
Technical data:
| Number of ports: | 2 galvanically isolated 20mA ports 2 TTL interfaces, not isolated | |
| Operating modes: | ||
| Isolation: | min. 1 kV | |
| UART: | 16950 with 128-byte FIFO | |
| Base addresses: | automatic configuration | |
| Interrupts: | automatic configuration | |
| Baud rate: | 50..57,600 baud | |
| Data format: | any format | |
| Signals: | RxD+, RxD-, TxD+, TxD- | |
| Serial connections: | 9-pin SUB-D connector | |
| Galvanic isolation: | Isolation voltage min. 1 KV DC between PC and serial ports 1 and 2 | |
| Power supply: | +5V 0.2A, +12V 0.1A | |
| Ambient temperature: | Storage: -40..+70°C, Operation: 0..+70°C | |
| Permissible relative humidity: | 0..95% RH (non-condensing) | |
| Dimensions: | 120 x 106 mm | |
| Weight: | approx. 110 g | |
| Delivery: | 1x PCI card 2x 20mA, 1kV isolated Driver CD |
{article 9}{text}{/article}
| Product Title: | Product SKU | Add to Cart |
|---|

