Like its predecessor models also offers the Com-Server LC the possibility of a serial RS232, RS422 or RS485 device in the TCP / IP Ethernet involvement. Favor of a simple start-up and effective operation, is its focus on fast and transparent tunnels serial data on the modes COM Port Redirector, Box to Box and TCP socket server. The configuration of the serial parameters are set via browser or telnet - in conjunction with the COM Port Redirector or automatically.
Com Port Redirector
Take the Com-Server up and configure your serial program to a virtual COM port - finished. The Windows kernel driver designed as a W & T COM Port Redirector supports up to 254 virtual COM ports and forwards them to the network server is on a Com. Your serial communication, a network-enabled without programming line. Locations and distances of the computer and serial devices are no longer relevant (COM Port Redirector: Datasheet with download link).
For example, application ...
Box-to-box
Two-Com-server with a few clicks logically be connected to each other over the network and provide a transparent tunnel through the data network. All incoming serial data is bidirectional and as soon as possible transferred to the opposite side. Reconnect functions provide for DSL forced separations, disruptions of infrastructure, etc. for an automatic reconnection of the Com-Server. Box-to-box mode is independent of the participating operating systems / devices, making the tunnel almost all serial connections suitable.
For example, application ...
TCP socket server
Network programming has become the standard repertoire of all programmers and is supported by all major development environments. Open from your own program out just a TCP connection to the Com-Server, and then communicate with any serial device connected to them - without driver and with full content control. If desired, thus it straight configuration of serial communication parameters.
For example, application ...
Install the COM Port Redirector and configure your serial program on one of the virtual COM ports - that’s all there is to it! Regardless of whether as a replacement for missing hardware COM ports, a solution for virtual environments like VMware, HyperV, etc., or as a simple line driver, you serial communication becomes network capable without a single line of programming. Multipoint mode and packaging options are of course also available here.
Data sheet with download link
Box-to-Box
In just a few clicks you can link 2 Com-Servers to each other logically and use an operating-system neutral, transparent and if desired TLS encrypted data tunnel through the network. Serial data are sent bi-directional and as fast as possible to the respective counterpart. Automatic reconnect functions in case of connection faults/dropouts are available as are multipoint operation and packeting options for fine tuning when using serial protocols.
To application example ...
TCP socket server
Network programming today belongs to the standard repertoire of all programmers. Integrate your serial device simply into your own network application. Take as a TCP client control of the connection into your own hands, be contacted as a TCP server using event-driven control, or use the efficient, contactless UDP protocol. The new multipoint mode and packaging options are of course available here also.
To application example ...
+45 75 64 33 99
info@actcom.dk
