+45 75 64 33 99
info@actcom.dk
Commissioning, configuration, troubleshooting
Why does the configuration menu of the Web-IO with serial Com-Server functionality not appear for a Telnet connection?
The Web-IO configuration menu is only available through TCP Port 1111. If the connection is established from the Telnet ...
How do I reset the Web-IO to its factory default settings?
The standard way of restoring the factory default settings is via Web-based management. After the administrator logs on,...
Is there a facility for assigning the IP address via the serial interface without a PC?
If you have a handheld PC (e.g. a palm), you have the facility of assigning the IP address via the integral serial inter...
How do you prevent in DHCP environments the Web-IO from getting an unintended IP address?
The Web-IO uses the DHCP-compatible BOOTP protocol to avoid this problem. In contrast to DHCP, this is based on fixed (s...
Why can’t I assign an IP address through the serial port?
Regardless of the serial transmission parameters set for normal operation, the Web-IO expects for entering the "x" chara...
How do you reset the USB-Server to its factory defaults?
The standard method for restoring the factory defaults is to use Web Based Management. After login the USB-Server can...
How does the USB-Server get the valid subnet mask and gateway address?
The following methods can be used to assign the USB-Server its initial IP address. Detailed descriptions of all procedur...
How does the USB-Server get its IP address?
The following methods can be used to assign the USB-Server its initial IP address. Detailed descriptions of all proce...
Is there a facility for assigning the IP address via the serial interface without a PC?
If you have a handheld PC (e.g. a palm), you have the facility of assigning the IP address via the integral serial inte...
Why can’t I assign an IP address through the serial port?
The Highspeed series of Com-Servers have serial combination interfaces which can be reconfigured between RS232, RS422 an...