+45 75 64 33 99
info@actcom.dk
Time-controlled switching
Web-IO 2x Digital Input, 2x Digital Output PoE Nyt: Tidsstyret omskifter med kontaktur-funktion Serverforbindelse direkt...
Applications
Connect Siemens Logo
Connect Siemens Logo!® and Display Logo!® TD over the network
Manage alarm and system info messages via Syslog
Evaluate measured values using the Syslog daemon.
Print graphical display
To print the graphical display of Web Graphs firmware version 1.50/1.39 and higher the Web browser needs special settings for print behavior. These are explained in the following for three browsers.
Incorporate temperature values via OPC server
Use the W&T OPC server to collect temperature data from the device and forward them to your client application.
Evaluate measured values using SNMP managers
Integrate the measured values into your SNMP manager using polling or have alarm and info traps sent.
Reduced data load in the network by using UDP polling
Poll measured values with just one UDP packet, thereby keeping the data load in the network low.Â
Write temperature and humidity values to a database
Integrate the measured values into your SNMP manager using polling or have alarm and info traps sent.
Sending alarm message via e-mail/SMS
Send messages - when limits are violated or timer-based - for informational purposes directly to the responsible technical as an e-mail or as a reroute via SMS.
Switching digital outputs when limits are exceeded
Turn on an indicator lamp when a limit is exceeded by 25°C.If the temperature is back to the valid range, turn the indic...