Turn on an indicator lamp when a limit is exceeded by 25°C.
If the temperature is back to the valid range, turn the indicator off again.

 

e-5wwww-29-grde-000

After these two devices have been configured for your network and connected, the following steps are required.

 e-57606-25-piww-000
No additional settings on the Web-IO Digital are necessary.

Define a TCP client alarm in the Web-Thermometer.

 

Enter your alarm limits as usual and configure the TCP client alarm by specifying as the TCP text the HTTP instruction for turning
Output 1 of the device ‘webiodigital.intranet.de’ on and off.

 e-57606-23-pide-000
This configuration ensures that when the temperature alarm of the Web-Thermometer is tripped, Output 1 of the Web-IO Digital turns on and then off when the alarm for Output 1 is deactivated.