+45 75 64 33 99
info@actcom.dk
Applications for Box to Box
Configure Web-IO Digital for Box-to-Box operation
Configuration of the Box-2-Box Master
To change the configuration of the Web-IO you first need to obtain the neces...
Flexibly distribute switching signals
Send switching signals over the network with actions
In building and automation technology switching...
MQTT as switching tunnel
Send switching signals barrier-free from A to B
There are cases in which switching signals are needed far away fro...
Web-IO Digital Box-to-Box
Web-IO Digital Box-to-Box
Send switching signals over the network
Whether gate control at the company entranc...
Switching between locations
Tunnel IO signals "Box-to-Box" through the network
Switching signals are often not needed where they...
Box-2-Box via MQTT with Web-IO 4.0
This step-by-step manual explains the setup of Box-2-Box operation of the Web-IO 4.0 Digital via the Internet of Things.
In Box-2-Box mode you connect two Web-IOs together so that switching signals present on the inputs of the one device are transmitted via MQTT to the outputs on the other device. The broker is CloudMQTT, a commercial, free provider for smaller applications.
To familiarize yourself with MQTT we recommend the page "Communication in the Internet of Things."
Tunnel switching signals next door or half-way around the world
Switching signals are often needed someplace other than where they originate. Connecting switching outputs with the components to be switched across locations
involves a lot of cabling effort - especially when multiple signals need to be sent.