Unfortunately, this article is no longer available.
Web-based Pulse count acquisition with reporting, operation from the browser and data logging. Count pulses from up to six signal sources. Send event- or time-triggered reports with information about the current counter states by mail for example. The b
Web-based Pulse count acquisition with reporting, operation from the browser and data logging.
Count pulses from up to six signal sources. Send event- or time-triggered reports with information about the current counter states by FTP or by mail for example. The browser-based operating software for the device’s own Web server allows you to always keep the counter states in view and read out the built-in data logger for analysis and archiving purposes. This Smart Meter means nothing will escape your attention!
Interfaces:
Ethernet 10/100BaseT autosensing, RJ45
Galvanic isolation between the ports
Isolation voltage min. 1000V between digital inputs and network
Management and connectivity:
NEW: Use the Web-Counter as an hours of operation counter
Web-based management
Configuration of the system parameters
Definition of reports for counter state reporting
12 freely configurable reports
Triggers: Each digital signal generator (input signal), counter states or time-triggered
RS232 interface as an optional configuration access.
Adapters:
2x screw terminal for power (alternative to POE)
8x screw terminal for digital inputs
Reports:
12 reports for messaging over the network
Response times:
Data exchange: typ. 12ms
max. input voltage +/-30V
protected against reverse connection within this range
Switching threshold 8V +/- 1V
"On" current = 2.2mA
integrated 32-bit counter
Counting frequency:
1000 edges or 500 pulses per second
Galvanic isolation:
Digital inputs - network: min. 1000V
Supply voltage:
Power-over-Ethernet (PoE) or via screw terminal with
DC 24V-48V (+/-10%) or AC 18Veff-30Veff (+/-10%)
Current consumption:
PoE Class 1 (0.44W - 3.84W)
typ. 125mA@24V DC
Displays:
1 LED Status
1 LED Power
1 LED Error
Housing and other data:
Housing:
Plastic housing for DIN rail mount
105 x 45 x 75mm (L x W x H)
Enclosure rating:
IP20
Weight:
approx. 190g
Ambient temperature:
Storage: -25 ... +70°C
Operating: 0 ... 55°C when not row mounted
0 ... 50°C when row mounted
Scope of delivery:
Web-Count 6x Digital
Quick Guide
W&T product CD
Unfortunately, this article is no longer available.
Detect pulse counts from sensors: The Web-Count 6x Digital makes it possible for you to acquire pulse counts from sensors with switching outputs and record them in the internal data memory with a time stamp.
With the Web-based operating software on the internal Web server you have full access to the device function from any browser in the network:
Monitor absolute and relative counter states
Read out the data logger (see Screenshots)
Export the stored data (Destination: *.CSV file)
Monitor utilization of the data memory
The software is self-refreshing, so that pages do not need to be reloaded in order to update the display. No installation or additional plugin is needed for running.
Once the device has received an IP address corresponding to your network, further parameter setting is also Web-based using configuration pages in the internal Web server.
Reports can be sent event- or time-triggered through a TCP/IP based network. The following methods are available:
Mail
SNMP trap
FTP
Syslog messages
TCP and UDP client
These reports can provide the reporting time, the current status of the counters and the state of the six digital inputs. The texts can be formulated individually.
+45 75 64 33 99
info@actcom.dk
