Com-Server Highspeed Isolated

General information:

• Direct connection for 3 serial devices with compact box for the DIN rail
• 1 kV galvanic isolation for each of the 3 ports
• RS232, RS422, RS485 selectable
• All standard serial baud rates of up to 230.4 kbits / s
• Remotely configurable via Web Based Management
• Network adapters:
  • 10/100BT autosensing
• Power supply:
  • 12-24 volts AC/DC
  • Shipped optionally with or without power supply:
    Please order power supplies as separate accessories.
• Conforms to standards both in office and industrial environments:
  • High noise resistance per EN 61000-6-2
  • Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3
• 5 year guarantee

• Serial port:
  • 3 x RS232, RS422, RS485 interface
  • DB9 connector, configurable
• Baud rate:
  • 50 to 230.400 baud
• Data format:
  • 7, 8 data bits, 1, 2 stop bits
  • No, even, odd parity
• Flow control:
  • Hardware handshake, XON-XOFF protocol
  • or can be suppressed
• Network:
  • 10/100BT autosensing
• Galvanic isolation:
  • Network connection: min. 500 volts
  • Serial ports: 1 kV mutually and with respect to the supply
• Supply voltage:
  • DC: 12V (-10%) .. 48V (+10%)
  • AC: 9Veff (-10%) .. 24Veff (+10%)
• Current consumption:
  • typ. 130mA @24V DC
• Supply voltage connection:
  • Plug-in screw terminal, 5.08mm spacing
  • Labeled "L+" and "M"
• Ambient temperature:
  • Storage: -40..+70°C
  • Operating in non-rowed installation: 0..+60°C
  • Operating in rowed installation 0..+50°C
• Permissible relative humidity:
  • 0..95% RH (non-condensing)
• Housing:
  • Plastic small housing, 105x75x45mm
• Weight:
  • approximately 400 g
• Scope of delivery:
  • 1x Com-Server Highspeed Isolated, 3 ports
  • 1x product CD with
  • WuTility management tool, Windows COM Port Redirector, OPC server, programming examples in C/VB/Delphi/Java, reference manual in German/English
  • 
    Please order power supplies separately as accessories

Background information:

The highly compact Com-Server Highspeed Isolated provides everything you need for directly connecting up to 3 serial interfaces to the computer network in industrial environments. All three interfaces are optically separated with a dielectric strength of 1 kV, both mutually and with respect to the supply voltage. In this way, breaks in operation due to potential differences, and problems occurring for example in the case of remote lightning strikes or when powerful rotary current motors start running, are counteracted from the very beginning.

All protocols are included (see box or applications after the product datasheets). The serial interfaces of the Com-Server can be switched between the standards RS232, RS422 and RS485. The serial and the network parameters are set via Telnet, ARP / RARP, SNMP or also via an Internet browser and web-based management.

Com Port Redirector:

The W&T COM Port Redirector for Windows 9x/NT/2000/XP/2003 also gives serially operating Windows programs the ability to communicate over the network. Virtual COM ports are installed on the system which behave like standard COM ports with respect to the applications. Communication with the terminal device is now however over the network and a Com-Server (data sheet with download link).

Protocols:

• Serial port protocols:
  • XON/XOFF
  • Hardware handshake
  • SLIP
  • other protocols on request
• Protocols for direct network connection:
  • TCP/IP (IPv6 on request):
    Socket, FTP, Telnet per client and server
  • Auxiliary protocols:
    ARP, RARP, DHCP/BOOTP,PING, RIP, SNMP
    Inventory keeping, group management
• Protocols for paired Com-Server operation:
  (connect serial devices in pairs on the network)
  • Box-to-box mode TCP/IP

Declaration of Comformity