This article has been replaced by the expanded successor model #57721
Clean air consists of 21% oxygen, 78% nitrogen and 1% argon. Under indoor air conditions noble gases, carbon monoxide, carbon dioxide (CO2) and mixed gases, so-called volatile organic compounds (VOCs) are also present in various concentrations. In assessing the room air quality with respect to quality, the two latter components are the most important: CO2 because of its historical significance as a guide value in the HVAC industry, and VOCs due to their affect on health and human well-being.
The amount of CO2 is proportional to the human metabolic rate and approximately proportional to the total concentration of VOCs.
Product Properties:
Configurable LED traffic light on the sensor for visual indication of limit values
Supply voltage via Power-over-Ethernet (PoE)
Phantom power using data pairs
Power over unused wire pairs
Alternate external supply possible
Monitor temperatures and trends from a browser
HTML page design user-variable
Direct access to the actual value, e.g., for integration into other Web pages
SNMP polling / alarm traps for temperature, relative humidity and air quality values for integrating into your existing SNMP management system
E-mail for alarm or reporting functions
Time synchronization via time server calibration
Adapters:
10/100MBit
Combined temperature/humidity/air quality sensor included
Easy Start:
Connect sensor and network cable
Connect supply voltage
Assign IP number
That’s it!
Application examples:
Monitor air quality of offices, conference rooms, etc.
Send alarms when limits are exceeded via e-mail, SNMP trap, TCP client, Syslog
Logging of the measured values via FTP, Excel file, e-mail attachment, internal memory
Background information:
Like all models im the Web-IO Climate series, the Web-Graph Air Quality model 57618 includes everything you need for connecting a temperature/relative humidity/ and air quality sensor to the computer network. In addition, the supply voltage per IEEE 802.3af (Power-over-Ethernet) can be provided over the network cable, with both phantom power over the data pairs as well as power using the wire pairs not used for 10/100BT. Problems with outlets, country-specific plug types, various AC voltages etc. are now a thing of the past.
For cases in which PoE is planned but not yet fully implemented, it is also possible to provide power using an external power supply and screw terminals.
Technical Data:
Connections and displays:
Combined sensor:
Temperature, relative humidity, air quality measurement
+45 75 64 33 99
info@actcom.dk
