RS232 Universal Serial T-Switch

Connecting three serial terminal devices

The Universal Serial T-Switch enables practically any imaginable uni- or bi-directional connection of three serial terminal devices. The T-switch has three serial terminals, each of which can be freely configured.

Application: Multiplexing of an RS232 interface

Interfaces:

• 3 x RS232, 9-pin SUB-D connector
  • 1x DTE pinout
  • 2x DCE pinout

Management and Connectivity:

• Operating modes:
  • Changeover using control sequences:
    
    • 1 computer runs for example two serial devices
  • time-controlled switching with adjustable switch time:
    
    • 2 computers share for example one serial terminal device:
    • Printer, plotter, hand scanner, card reader, etc...
• No manual intervention necessary
• Data back channel allows connection of bi-directional peripheral devices
• Individual configuration of interfaces
• Conversion of baud rate, data format and handshake protocol possible
• Integrated diagnostic and startup aid: Setting dump

Power supply:

• External
  • Wide voltage range up to 24V

Standards & more

• Conforms to standards both in office and industrial environments:
  • High noise resistance per EN 61000-6-2
  • Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3
• 5 year guarantee

Connections and displays:

• Serial ports:
  • 3 x RS232 (Port A and B: Female, Port C: Male)
  • all ports can be configured independently of each other
• Supported signals:
  • RxD, TxD, CTS, DTR
• Baud rate:
  • 150..115,200 baud
• Data format:
  • 7,8 data bits, no,even,odd parity
• Flow control:
  • Hardware handshake or
  • XON/XOFF protocol
• Integrated buffer:
  • 4 MB
• Operating modes:
  • Switching via control sequence
  • time-controlled switching
• Switching times:
  • Adjustable in increments of 5, 15, 30, 120 seconds
  • (other values on request)
• Power supply:
  • 12..24V DC/AC
• Current consumption:
  • Typ. 30 mA at 24V DC
• Supply voltage connection:
  • Plug-in screw terminal, 5.08mm spacing
  • Labeled "L+" and "M"

Housing and other data:

• Housing:
  • Plastic housing, 105 x 75 x 45mm
• Weight:
  • approx. 150g
• Ambient temperature:
  • Storage: -40..+70°C, Operation: 0..+60°C
• Permissible relative humidity:
  • 0..95% RH (non-condensing)
• Scope of delivery:
  • 1 x Universal Serial T-Switch, 4 MByte Buffer
  • 
    Please order power supplies separately as accessories

Notes on use:

The W&T RS232 Universal Serial T-Switch is an extremely versatile device. Virtually any uni- or bi-directional 2:1 coupling of RS232 devices is possible with this switch.

The Adapter has 3 serial ports: 1 Master port "C" and 2 Slave ports "A" and "B". Each of these ports can be parameterised independently of the others.

The Switch supports 4 data channels (Master C <> Slave A, Master C <> B), which are equipped in each direction with 1 MB buffers. The channels are switched either timed or using control sequences from one of the three Switch ports.

Declaration of Conformity (wut.de)