The 13410 PC Card adds a 20mA port with galvanic isolation to your PC. The additional TTL ports allow any three non-isolated serial ports to be implemented.
Application: PC as PLC programming device
Product properties:
Interfaces:
1x 20mA interface
3x serial TTL interfaces without galvanic isolation
usable with W&T interface modules as RS232, RS422, RS485 or 20mA interfaces
1x 32-bit PCI bus
for 5V PCI systems
Galvanic isolation between PC and Port 1
Isolation voltage 1kV
Management and connectivity:
Compact size makes it easy to use even in Low Profile systems
4 x UART 16950 with 128-byte FIFO
Plug-and-play: automatic configuration of base address and interrupt
Conforms to standards both in office and industrial environments:
High noise resistance per EN 61000-6-2
Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3
5 year guarantee
Technical data:
Connections and displays:
System bus:
32-bit PCI-BUS / 33MHz / for 5V PCI systems
Serial port:
1x 20mA interface
9-pin SUB-D adapter
3x non-isolated serial TTL ports
12-pin header with 2mm spacing
Operating modes:
20mA selectable active/passive mode
Maximum baud rate:
57600 baud
Data format:
any format
Signals:
RxD, TxD+
UART:
16950 with 128-byte FIFO
Galvanic isolation:
Isolation voltage min. 1kV DC
between PC and serial port 1
Supply voltage:
5V DC
Current consumption:
typ. 200mA
Housing and other data:
Dimensions:
134 x 80mm (W x H)
Enclosure rating:
IP00
Weight:
approx. 90g
Ambient temperature:
Storage: -40..+70°C
Operating: 0..+70°C
Permissible relative humidity:
5..95% RH, non-condensing
Scope of delivery:
Low Profile PCI card, 1x 20mA
slot bracket in standard size
Quick start manual
"Low Profile" PCI cards have the same electrical properties as their counterparts in standard PCI format. Only the height of the cards is significantly reduced compared with the original size and thus allows the cards to be installed in smaller PCs. An additional slot bracket of normal size is included for installing Low Profile cards in standard housings.
Additional interface modules are connected to the interface card using flat ribbon cable and attached to a slot in the PC case. Both components can be ordered as a separate accessory for Low-Profile housing and for standard housing.
+45 75 64 33 99
info@actcom.dk
