The Isolator in the compact dongle housing provides galvanic isolation between two RS232 devices with an isolation voltage of min. 1kV DC by being simply looped into the data line.
Product properties:
Interfaces:
2x RS232 ports
25-pin SUB-D plug, DCE assignment
25-pin SUB-D socket, DTE assignment
Galvanic isolation between the ports
Isolation voltage 1kV DC
Management and Connectivity:
Secure RS232 transmission over medium distances
Simple to use, true plug-and-play
No re-configuration of transmission parameters required
Power supply:
No additional power source required
Standards & more
Conforms to standards both in office and industrial environments:
High noise resistance per EN 61000-6-2
Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3
5 year guarantee
Connections and displays:
Serial Port A:
RS232 Interface
25-pin SUB-D adapter, DCE assignment
Serial Port B:
RS232 Interface
25-pin SUB-D socket, DTE assignment
Baud rate:
300..19,200 baud
Data format:
any format
Galvanic isolation:
min. 1kV DC
Supported signals:
RxD, TxD
Supply voltage:
through the RS232 signals
Required static current:
approx. 2 mA @ 8V
Housing and other data:
Housing:
Plastic small housing
63 x 54 x 16 mm (L x W x H)
Weight:
approx. 50g
Ambient temperature:
Storage: -40..+70°C
Operation: 0..+50°C
Relative humidity:
5..95% RH (non-condensing)
Scope of delivery:
RS232 isolator, 1 kV
25-pin Gender Changer female/female
Elimination of interference:
The use of isolators in data lines eliminates the effects of interference to which the PC is otherwise subjected through its data cables (ground loops, antenna effects, potential differences), remote lightning strikes).
Electrical isolators are not to be confused with surge protectors that are often incorrectly marketed for the same purpose: Surge protectors have no effect on equalizing currents that exist between the connected devices due to the potential differences, and they cannot prevent damage to interface components by such currents.
+45 75 64 33 99
info@actcom.dk
