Web-IO Digital - Connecting switching signals point-to-point

Adding actions for turning on an output

To change the configuration of the Web-IO you first need to obtain the necessary access rights by entering the administrator password.

Then in the menu tree select Actions.
Click on the Add button to create a new action.
For the action to be executed when the respective trigger event occurs, it must first be enabled. Under Action Name you can assign a meaningful name.

In the Triggers field select Input. Specify which input should trigger the action and select Upon change switch to ON.
Under Action select Switch output and then Switch output on another Web-IO. Enter the IP address and the password for the target Web-IO in the corresponding fields.
Under Switch from specify the output to switch and under to stateselect ON.

In the menu tree click on Actions and add another action.
Here again the action must first be enabled and under Action Name a meaningful name assigned.
In the Triggers field select Input. Specify which input should trigger the action. Under Upon change switch to select OFF.
In the Action field select Switch output and then Switch output on another Web-IO. Enter the IP address and the password for the target Web-IO in the corresponding fields.
Under Switch from specify the output to switch and under to state select OFF.

If the target Web-IO has the Web-API and switching the output using it activated, the corresponding output follows the input which is configured as the trigger.