1. Activate SNMP

For the Web-Thermograph to be queried with SNMP, this function must first be enabled in the unit:

 

2. Configure NAGIOS

If NAGIOS is correctly installed on your PC, you can go to the Web page: http://<rechnername>/nagios

to find the start page of NAGIOS. First only the status of the local host is displayed.

 

3. Create configuration file

• For the Web-Thermograph to be represented in NAGIOS, a configuration file must be created. This is usually stored in the directory /usr/local/nagios/etc/objects.
• Create a file named thermo.cfg
• First a definition for the device and a device group must be created:

define host
	{
	use                generic-host
	host_name          webgraph
	alias              Web-Thermograph
	address            192.168.0.12
	hostgroups         wut_devices
	check_command      check-host-alive
	max_check_attempts 3
	}
define hostgroup
	{
	hostgroup_name     wut_devices
	alias              WuT Devices
	members            webgraph
	}

The most important parameters here are the IP address of the device and the host name which you want displayed in NAGIOS. The names of the group and the alias names will become visible in NAGIOS later.

To query the device via SNMP, a corresponding command must be created which uses the plug-in check_snmpto retrieve the measurement from the unit:

define command
	{
	command_name       check_57610
	command_line       $USER1$/check_snmp -H $HOSTADDRESS$ -o 1.3.6.1.4.1.5040.1.2.8.1.3.1.1.1
	}

The command named check_57610 retrieves the measurement using SNMP and the corresponding SNMP-OID.

No a service must be created which executes the command created above:

define service
	{
	use                 generic-service
	host_name           webgraph
	service_description SNMP-Request
	check_command       check_57610
	}

Once all the definitions are stored in the file thermo.cfg, NAGIOS must be made to load this file as a configuration at startup.

Open the file /usr/local/nagios/etc/nagios.cfg and insert the path to the file created above into the list of configuration files:

(...)
	# You can specify individual object config files as shown below:
	cfg_file=/usr/local/nagios/etc/objects/commands.cfg
	cfg_file=/usr/local/nagios/etc/objects/contacts.cfg
	cfg_file=/usr/local/nagios/etc/objects/timeperiods.cfg
	cfg_file=/usr/local/nagios/etc/objects/templates.cfg
	cfg_file=/usr/local/nagios/etc/objects/thermo.cfg
	(...)

 

4. Display the measurement

• Restart NAGIOS.
• On the Service Status page the Web-Thermograph is now displayed with the current temperature.