Description

IP wall mount housing

Mechanical accessories: Cable fittings:
(from left: M25; M20; M16; M12)
Features
Product properties:
- Housing for outdoor use appropriate for W&T devices in DIN rail mount housing
- Dimension: 180x130x175mm
- With integrated 35mm support rail
- Pre-stamped holes in lower housing section are provided for easy cable fitting installation (M12-M32)
- Wide range of cable glands and sealing accessories available
|
Background information:
Installing devices outdoors or in rooms with humidity and/or dust requires the use of additional protective enclosures, since these protect the electronics from environmental effects.
The polycarbonate enclosure is provided with a pre-installed 35mm support rail. The cable glands are available as separate accessories, since each application will have different requirements. Note that a cable gland is available which allows a network cable to be inserted into the housing without field-assembly of the RJ45 connector.
The unusual installation height of the enclosure with a dimension of 180mm also makes it easy to install serial W&T devices with threaded-on SUB-D connectors.
Data
Technical data:
|
|
|
Enclosure rating (EN 60529): |
|
IP66 / IP67 |
NEMA classification: |
|
NEMA 1, 4, 4X, 6 |
Fire rating: |
|
UL 94 5V |
Impact resistance (EN 62262): |
|
IK 08 |
UV resistance: |
|
UL 508 |
Halogen-free (DIN/VDE 0472, Part 815): |
|
yes |
|
|
|
Material: |
|
polycarbonte |
Cover screw material: |
|
Nylon |
Sealing material: |
|
TPE |
|
|
|
Base color: |
|
RAL 7035 |
Cover color: |
|
Transprent, smoke-gray |
Cover screw color: |
|
black |
|
|
|
Housing operating temperature: |
|
Continuous: -40..+80°C Short-time: -40..+120°C |
|
|
|
Weight: |
|
approx. 600 g |
Dimensions: |
|
180 x 130 x 175 mm Dimensional drawing in PDF format  |
|
|
|
Delivery: |
|
IP housing with integrated DIN rail |
FAQs
Send messages - when limits are violated or timer-based - for informational purposes directly to the responsible technical as an e-mail or as a reroute via SMS.